Subaru Outback manuals

Subaru Outback: Fuel

Lubricants


READ NEXT:

 Lubricants

Engine oil For the checking, adding and replacing procedure or other details, refer to “Engine oil” F11-12. NOTE The procedure for changing the engine oil and oil filter should be performed

 Fluids

*1: Use one of the indicated types of fluid. *2: The indicated fluid quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and othe

 Engine coolant

The indicated coolant quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors. For more details about maintenance

SEE MORE:

 Oil Pump

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the V-belts. <Ref. to ME(H4SO)-43, REMOVAL, V-belt.> 3) Remove the power steering oil pump assembly. Disconnect the connector from power steering pump switch. Disconnect the pressure hose (b) and suction hose (a) from power

 Clutch Pipe and Hose

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the collector cover. (turbo model) 3) Remove the air intake boot assembly. (non-turbo model) <Ref. to IN(H4SO)-8, REMOVAL, Air Intake Boot.> 4) Remove the intercooler. (turbo model) <Ref. to IN(H4DOTC)-17, REMOVAL, Intercoo

© 2010-2023 Copyright www.suoutback.com