Subaru Outback: Recommended grade and viscosity
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Rear differential gear oil / Recommended grade and viscosity
Each oil manufacturer has its own base oils and additives. Never use different brands together. For details, refer to “Manual transmission, front differential and rear differential gear oil” F12-6.
READ NEXT:
Checking the fluid level
WARNING
Be careful not to burn yourself because the fluid may be hot.
CAUTION
● When power steering fluid is being added, use only clean fluid, and be careful
not to allow any dirt into t
SEE MORE:
Cylinder Block
A: REMOVAL
NOTE:
Before conducting this procedure, drain the engine
oil completely.
1) Remove the engine from the vehicle. <Ref. to
ME(H4SO)-31, REMOVAL, Engine Assembly.>
2) Remove the intake manifold. <Ref. to
FU(H4SO)-17, REMOVAL, Intake Manifold.>
3) Remove the crank pulley. <R
Oil Pump
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the V-belts. <Ref. to ME(H4SO)-43, REMOVAL, V-belt.>
3) Remove the power steering oil pump assembly.
Disconnect the connector from power steering pump switch.
Disconnect the pressure hose (b) and suction hose (a) from power
© 2010-2023 Copyright www.suoutback.com
