Subaru Outback (BR): Compass zone adjustment
Subaru Outback (BR) 2010-2015 Owners Manual / Instruments and controls / Mirrors / Auto-dimming mirror with compass and HomeLink® (if equipped) / Compass zone adjustment
Compass calibration zones
1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location.
2. Press and hold the compass display button for 3 seconds until the zone selection comes up (a number will be displayed in the mirror compass window).
3. Press the compass display button repeatedly until the correct zone setting for your location is displayed.
4. Releasing the button for 5 seconds will exit the zone setting mode.
READ NEXT:
SEE MORE:
Inspection Locations after a Collision
A: REPLACEMENT
Replace the following parts if the airbag has been activated.
1. FRONT COLLISION
1) Driver's airbag module.
2) Passenger's airbag module.
3) Driver's seat belt (pretensioner).
4) Passenger's seat belt (pretensioner).
5) Airbag control module.
6) Front sub sensor (right and left).
Warranties and maintenance
vehicle damage or malfunction caused by trailer towing. If you use your vehicle
to tow a trailer, more frequent maintenance will be required due to the additional
load. (Refer to “Maintenance schedule under severe driving conditions” in the “Warranty
and Maintenance Booklet”.)
Under n
© 2010-2026 Copyright www.suoutback.com
