Subaru Outback manuals

Subaru Outback: When “PUSH EJECT” is displayed

Press the eject button to unload the disc. Check the disc for damage or deformation, and also check that the correct disc is inserted. Do not try to unload the disc forcibly. Single CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected. If the disc cannot be unloaded or this message remains displayed, please contact your SUBARU dealer.

READ NEXT:

 When “CHECK DISC” is displayed

Press the eject button to unload the discs. Check that the disc is not damaged or scratched, and also check that the disc is inserted correctly. This message may appear when using some CD-RW discs

 Auxiliary input jack

By connecting a commercial audio product to the vehicle, such as a portable audio player, you can hear its sound via the vehicle’s speaker. An auxiliary (AUX) input jack is equipped in the cent

 Precautions to observe when handling a compact disc

Use only compact discs (CDs, CD-Rs and CD-RWs) that have the mark shown in the following illustration. Also, some compact discs cannot be played. ● You cannot use a DualDisc in the CD pla

SEE MORE:

 High/low beam change (dimmer)

To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “” on the combination meter is also on. To switch back to low beam, pull the lever back to the detent position.

 Windshield Glass

A: REMOVAL 1. USING WINDSHIELD GLASS KNIFE 1) Disconnect the ground cable from battery. (Models with wiper deicer) 2) Remove the front pillar trim. <Ref. to EI-102, REMOVAL, Upper Inner Trim.> 3) Disconnect the wiper deicer connector. (Models with wiper deicer) 4) Remove the cowl panel. &l

© 2010-2022 Copyright www.suoutback.com