Subaru Outback (BR): Parking brake warning
Subaru Outback (BR) 2010-2015 Owners Manual / Instruments and controls / Warning and indicator lights / Brake system warning light / Parking brake warning
The light illuminates with the parking brake applied while the ignition switch is in the “ON” position. It turns off when the parking brake is released.
READ NEXT:
Brake fluid level warning
This light illuminates when the brake fluid level has dropped
to near the “MIN” level of the brake fluid reservoir with the ignition switch in
the “ON” position and with the parking brake
Electronic Brake Force Distribution (EBD) system warning
The brake system warning light also illuminates if a malfunction
occurs in the EBD system. In that event, it illuminates together with the ABS warning
light. The EBD system may be malfunctioning i
Electronic parking brake system warning
The brake system warning light flashes when the electronic parking
brake system is malfunctioning. If the warning light flashes, promptly park in a
safe location as soon as possible and contact yo
SEE MORE:
Connecting a trailer
1. Remove the receiver cover from the hitch receiver tube. Then insert the ball
mount into the hitch receiver tube.
2. Insert the hitch pin into the hole on the hitch receiver tube so that the
pin passes through the ball mount.
3. Insert the safety pin onto the hitch pin securely.
4. Pull
Steering Wheel
A: REMOVAL
1) Disconnect the negative terminal from the battery, and wait for 60 seconds
or more.
2) Set the tire to the straight-ahead position.
3) Remove the driver's airbag module assembly.
Push in the snap pin using a hexagon wrench or equivalent wrapped with a
protective tape to disengag
© 2010-2026 Copyright www.suoutback.com
