Subaru Outback (BR): ON
This is the normal operating position after the engine is started.
READ NEXT:
START
CAUTION
Do not turn the ignition switch to the “START” position while the engine is running.
The engine is started in this position. The starter cranks the engine to start
it. When the key is
Key reminder chime
The reminder chime sounds when the driver’s door opens and the key is in the
“LOCK” or “Acc” positions. The chime stops when the ignition switch is turned to
the “ON” position or the
Ignition switch light
For easy access to the ignition switch in the dark, the ignition switch light
illuminates when driver’s door is opened or when the driver’s door is unlocked using
the remote keyless entry tran
SEE MORE:
Rear gate (Outback) – if the rear gate cannot be unlocked
In the event that you cannot unlock the rear gate by operating the power door
locking switches or the remote keyless entry system, you can unlock it from inside
the cargo area.
1. Remove the access cover at the bottom-center of the rear gate trim using flat-head
screwdriver.
2. Locate the
Air Breather Hose
A: REMOVAL
1) Remove the air intake boot assembly. <Ref. to IN(H4SO)-8, REMOVAL, Air
Intake Boot.>
2) Remove the two air breather hoses.
3) Remove the oil cap.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use new O-rings.
C: INSPECTION
Check the hose for peeling, crack
© 2010-2026 Copyright www.suoutback.com
