Subaru Outback (BR): Air conditioner button
Subaru Outback (BR) 2010-2015 Owners Manual / Climate control / Manual climate control system (if equipped) / Manual climate Control panel / Air conditioner button
The air conditioner operates only when the engine is running.
Press the air conditioner button while the fan is in operation to turn on the air conditioner. The indicator light will illuminate.
Press it again to turn off the air conditioner. The indicator light will turn off.
READ NEXT:
Air inlet selection button (Manual climate Control system)
ON position (recirculation): Interior air is recirculated inside the vehicle.
Press the air inlet button to the ON position. The indicator light will illuminate. Place this button in the O
Heater operation
NOTE
● When the “” button or “”
button is pressed the air conditioner compressor automatically operates to quickly
defog the windshield. However the indicator on the air conditioner
Defrosting or defogging the windshield
To direct warm air to the windshield and front door windows:
1. Set the air inlet selection button to the OFF position.
2. Press the “” button.
3. Turn the temperature control dial all the way
SEE MORE:
Speed Control Systems
General Description
A: SPECIFICATION
B: COMPONENT
Accelerator pedal ASSY
Clip
Accelerator plate
Accelerator stopper
Tightening torque: N*m (kgf-m, ft-lb)
T: 18 (1.8, 13.3)
C: CAUTION
Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when performing
Main Relay
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the glove box lid assembly.
3) Remove the main relay from the relay holder.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Check that the main relay has no deformation,
cracks or other damages.
2) Measur
© 2010-2026 Copyright www.suoutback.com
