Subaru Outback (BR): Automatic release function by accelerator pedal
The electronic parking brake system has an automatic release function. The parking
brake will be automatically released by depressing the accelerator pedal. However,
the automatic release function does not operate under the following conditions.
● Any door (other than the trunk lid or rear gate) is open.
● The driver’s seatbelt is not fastened. If the parking brake is automatically
released, the brake system warning light and the indicator on the parking brake
switch turn off.
NOTE
Even if you have applied the parking brake by pressing the parking brake switch,
the parking brake will be automatically released when the accelerator pedal is depressed.
READ NEXT:
The electronic parking brake system has a Hill Holder function. If the Hill Holder
function is activated, the parking brake will be automatically applied when stopping
on an uphill slope with the
CAUTION
Use the emergency brake only in case of an emergency. If the emergency brake
is excessively used, the brake parts will wear down faster or the brake may not
work sufficiently due to rear
When parking your vehicle, always perform the following items.
● Apply the parking brake.
● For MT models, put the shift lever in the “1” (1st) for upgrade or “R” (Reverse)
for
SEE MORE:
A: REMOVAL
NOTE:
For C6 model, refer to Transmitter. <Ref. to SL-75, REMOVAL, Transmitter.>
1. KEYLESS TRANSMITTER BATTERY
CAUTION:
To prevent static electricity damage to the keyless transmitter printed circuit
board, touch the steel
area of building with hand to discharge static electricity
1) Master key
2) Submaster key
3) Valet key
4) Key number plate
5) Security ID plate
Three types of keys are provided for your vehicle:
Master key, submaster key and valet key. The master key and submaster key fit
all locks on your vehicle.
● Ignition switch
● Driver’s door
© 2010-2026 Copyright www.suoutback.com
