Subaru Outback (BR): Moonroof – if moonroof cannot be closed
If the moonroof cannot be closed with the moonroof switch, you can close the
moonroof manually.
1. Take out the screwdriver from the tool bucket.
2. Open the overhead console. Refer to “Overhead console” F6-8.

3. Remove the two screws that retain the moonroof switch body. Then, remove the
moonroof switch.

4. Insert the hex-head wrench in the end of the motor shaft.
To lower the moonroof, turn the wrench clockwise.
To close the moonroof, turn the wrench counterclockwise.
Have your vehicle checked and repaired by an authorized SUBARU dealer.
READ NEXT:
CAUTION
● When washing the vehicle, the brakes may get wet. As a result, the brake stopping
distance will be longer. To dry the brakes, drive the vehicle at a safe speed while
lightly press
SEE MORE:
Calibration Zones for Compass
1. Check the "Compass calibration zones" map displayed above to ensure that the compass zone setting matches your geographic area accurately.
2. Hold down the switch for 6 seconds until the zone selection menu appears (a number will appear in the mirror co
To activate the right turn signal, push the turn signal lever up. To activate
the left turn signal, push the turn signal lever down. When the turn is finished,
the lever will return automatically. If the lever does not return after cornering,
return the lever to the neutral position by hand.
© 2010-2026 Copyright www.suoutback.com
