Subaru Outback (BR): Drive belts
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Drive belts
It is unnecessary to check the deflection of the drive belt periodically because your engine is equipped with an automatic belt tension adjuster. However, replacement of the belt should be done according to the maintenance schedule in the “Warranty and Maintenance Booklet”. Consult your SUBARU dealer for replacement.
If the belt is loose, cracked or worn, contact your SUBARU dealer.
READ NEXT:
Checking the oil level in Manual transmission
Non-turbo models
1) Yellow handle
Turbo models
1) Yellow handle
Check the oil level monthly.
1. Park the vehicle on a level surface and stop the engine.
2. Pull out the level
SEE MORE:
Front ABS Wheel Speed Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Lift up the vehicle, and then remove the front wheels.
3) Remove the front ABS wheel speed sensor.
CAUTION:
Be careful not to damage the sensor.
Do not apply excessive force to the sensor harness.
Disconnect the front ABS wheel speed
Selecting reverse gear
CAUTION
Shift into reverse ONLY when the vehicle has completely stopped. It may cause
damage to the transmission to try shifting into reverse when the vehicle is moving.
1) Slider
You must raise the slider and hold it in that position before you can move the
shift lever to the “R” posit
© 2010-2026 Copyright www.suoutback.com
