Subaru Outback (BR): Tire rotation

Vehicles equipped with 4 non-unidirectional tires
1) Front

Vehicles equipped with unidirectional tires
1) Front
Tire wear varies from wheel to wheel. To maximize the life of each tire and ensure
that the tires wear uniformly, it is best to rotate the tires every 7,500 miles
(12,000 km). Move the tires to the positions shown in the applicable illustration
each time they are rotated.
Replace any damaged or unevenly worn tire at the time of rotation. After tire
rotation, adjust the tire pressures and make sure the wheel nuts are correctly tightened.
After driving approximately 600 miles (1,000 km), check the wheel nuts again
and retighten any nut that has become loose.
READ NEXT:
The wheels and tires are important and integral parts of your vehicle’s design;
they cannot be changed arbitrarily. The tires fitted as standard equipment are optimally
matched to the characteri
When replacing wheels due, for example, to damage, make sure the replacement
wheels match the specifications of the wheels that are fitted as standard equipment.
Replacement wheels are available f
Aluminum wheels can be scratched and damaged easily. Handle them carefully to
maintain their appearance, performance, and safety.
● When any of the wheels is removed and replaced for tire rot
SEE MORE:
Press the “RES/SET” switch to the “RES” side and hold it until the vehicle reaches
the desired speed. Then, release the switch. The vehicle speed at that moment will
be memorized and treated as the new set speed.
U.S.-spec. models
When the difference between the actual vehicle speed
CAUTION
If you restart the engine while the vehicle is moving, shift the select lever
into the “N” position. Do not attempt to place the select lever of a moving vehicle
into the “P” position.
1. Apply the parking brake.
2. Turn off unnecessary lights and accessories.
3. Shift the se
© 2010-2026 Copyright www.suoutback.com
