Subaru Outback (BR): Wheel replacement
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Tires and wheels / Wheel replacement
When replacing wheels due, for example, to damage, make sure the replacement wheels match the specifications of the wheels that are fitted as standard equipment. Replacement wheels are available from SUBARU dealers.
WARNING
Use only those wheels that are specified for your vehicle. Wheels not meeting specifications could interfere with brake caliper operation and may cause the tires to rub against the wheel well housing during turns. The resulting loss of vehicle control could lead to an accident.
READ NEXT:
Aluminum wheels
Aluminum wheels can be scratched and damaged easily. Handle them carefully to
maintain their appearance, performance, and safety.
● When any of the wheels is removed and replaced for tire rot
Windshield washer fluid
CAUTION
Never use engine coolant as washer fluid because it could cause paint damage.
If you spray washer fluid on the windshield but the windshield washer fluid warning
light illuminates or the
Replacement of wiper blades
Grease, wax, insects, or other materials on the windshield or the wiper blade
results in jerky wiper operation and streaking on the glass. If you cannot remove
the streaks after operating the wind
SEE MORE:
Extension Case
A: REMOVAL
1) Remove the transmission assembly. <Ref. to
5AT-37, REMOVAL, Automatic Transmission Assembly.>
2) Disconnect the rear vehicle speed sensor connector.
3) Remove the rear vehicle speed sensor.
4) Remove the extension case.
B: INSTALLATION
1) Attach the selected reduction driven
Front turn signal light
NOTE
It may be difficult to replace the bulbs. We recommend that you have the bulbs
replaced by your SUBARU dealer if necessary.
1. Turn over the protective cover of the engine compartment.
2. Turn the socket counterclockwise and pull it out.
3. Pull out the bulb from the socket and replac
© 2010-2026 Copyright www.suoutback.com
