Subaru Outback manuals

Subaru Outback (BR): Basic information about tire pressure monitoring system (TPMS)

Subaru Outback (BR) 2010-2015 Owners Manual / Starting and operating / Basic information about tire pressure monitoring system (TPMS)

The tire pressure monitoring system provides the driver with a warning message

 

The tire pressure monitoring system alerts the driver by transmitting a signal from a sensor in each wheel when tire pressure drops significantly.

This system activates when the vehicle reaches speeds above 20 mph (32 km/h) and may not respond immediately to sudden drops in tire pressure, such as a blow-out from hitting a sharp object.

Warning: If the low tire pressure warning light comes on while driving, avoid sudden braking and gradually reduce speed while continuing straight. Then, pull off the road slowly to a safe location to prevent accidents involving vehicle damage or personal injury.

Ensure all four tires are properly inflated to the COLD tire pressure indicated on the tire placard on the driver’s side door pillar.

Even after short drives, tires warm up and their pressures increase. Allow the tires to cool before adjusting pressures to standard values. The tire pressure monitoring system does not operate when the vehicle is stationary. After adjusting tire pressures, accelerate to at least 20 mph (32 km/h) to initiate TPMS re-checking. If tire pressures are above the severe low pressure threshold, the warning light should turn off shortly after.

If the warning light remains illuminated after adjusting tire pressure, a tire may have significant damage or a fast leak. Replace a flat tire with a spare as soon as possible.

When mounting a spare tire or replacing a wheel rim without transferring the original pressure sensor, the low tire pressure warning light will blink for about one minute before staying steadily lit. Contact a SUBARU dealer promptly for tire and sensor replacement or system reset.

Avoid injecting tire liquid or aerosol tire sealant, as this can disrupt tire pressure sensors. If the warning light remains steady after blinking for about a minute, seek inspection by a SUBARU dealer.

Caution: Avoid placing metal film or parts under the driver’s seat, as this can interfere with tire pressure sensor signals, causing the monitoring system to malfunction.

Note: This device complies with FCC Rules and Industry Canada standards. Ensure compliance with approved changes or modifications to avoid voiding operating authority.

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

READ NEXT:

 Parking your vehicle

WARNING ● Never leave unattended children or pets in the vehicle. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot or sunny day

 Electronic parking brake

1) Parking brake switch 2) Hill Holder switch 3) Indicator light WARNING ● Before exiting the vehicle, make sure that you turn off the engine. Otherwise, the parking brake may be release

 Automatic release function by accelerator pedal

The electronic parking brake system has an automatic release function. The parking brake will be automatically released by depressing the accelerator pedal. However, the automatic release function

SEE MORE:

 Air Mix Door Actuator

A: REMOVAL 1. DRIVER'S SEAT 1) Remove the instrument panel lower cover. <Ref. to EI-64, REMOVAL, Instrument Panel Lower Cover.> 2) Remove the bolts, and remove the knee guard panel. 3) Remove the body integrated unit. CAUTION: Be careful to keep water and other foreign materials away from b

 Defroster button

To defrost or dehumidify the windshield and front door windows, press the defroster button “”. When the “” button is pressed, the air conditioner compressor automatically operates to quickly defog the windshield, outside air is drawn into the passenger compartment, airflow is dire

© 2010-2024 Copyright www.suoutback.com