Subaru Outback (BR): Brake pad and lining
While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake
pedal lightly. Repeat this five or more times.
READ NEXT:
The break-in maintenance for the parking brake linings should be performed at
a SUBARU dealer.
You should be familiar with type of tires present on your vehicle.
SEE MORE:
NOTE
It may be difficult to replace the bulbs. We recommend that you have the bulbs
replaced by your SUBARU dealer if necessary.
1. Pull off the fender lining. Refer to “Pulling off the fender lining” F11-7.
2. Disconnect the electrical connector.
1) For left-hand side
2) For right-ha
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the cover (A) and clip (B) from air intake
boot assembly. (2.5 L non-turbo model)
3) Loosen the clamp (A) which connects the air intake
boot assembly and air cleaner case. (2.5 L
non-turbo model)
4) Loosen the clamp (B) which connec
© 2010-2026 Copyright www.suoutback.com
