Subaru Outback (BR): Engine coolant - Subaru super coolant
Subaru Outback (BR) 2010-2015 Owners Manual / Specifications / Engine coolant - Subaru super coolant
The specified coolant quantity serves as a general reference and may vary slightly based on temperature and other variables. For comprehensive information regarding maintenance and servicing, consult the "Cooling system" section.
READ NEXT:
Tires specification in the table
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts by yourself, have the tighteni
Wheel alignment
Item
Legacy
Outback
2.5 L non-turbo models
Except 2.5 L non-turbo models
SEE MORE:
Operating Cylinder
A: REMOVAL
NOTE:
The illustration below is suitable for every model.
Perform the same procedures for the other models.
1) Remove the collector cover. (turbo model)
2) Remove the air intake boot assembly. (non-turbo
model) <Ref. to IN(H4SO)-8, REMOVAL, Air Intake
Boot.>
3) Remove the interc
Roll Connector
A: REMOVAL
1) Position the front wheels straight ahead. (After moving a vehicle 5 m (16
ft) or more with front wheels positioned
straight ahead, make sure that the vehicle moves straight ahead.)
2) Turn the ignition switch to OFF.
3) Disconnect the ground cable from battery and wait for at least 6
© 2010-2026 Copyright www.suoutback.com
