Subaru Outback (BR): Fast-forwarding and fast-reversing
Subaru Outback (BR) 2010-2015 Owners Manual / Audio / CD player operation / Fast-forwarding and fast-reversing
READ NEXT:
Fast-forwarding
Press the “” side of the “SEEK” button
continuously to fast-forward the track/file. Release the button to stop fast-forwarding.
NOTE
If you fast-forward to the end of the last track/file
Repeating
Type A audio
Type B audio
To repeat a track/file (track), briefly press the “RPT/RDM” button (type A audio)
or “RPT” button (type B audio) while the track/file (track) is playing.
Eac
Random playback
Type A audio
Type B audio
To play back a track/file(s) at random, press the “RPT/RDM” button for 0.5 second
or longer (type A audio) or press the “RDM” button (type B audio).
●
SEE MORE:
Inspection Mode
A: PROCEDURE
Perform the diagnosis shown in the following DTC table.
When performing the diagnosis not listed in "List of Diagnostic Trouble Code (DTC)",
refer to the item on the
drive cycle. <Ref. to EN(H4SO)(diag)-45, Drive Cycle.>
1. PREPARATION FOR THE INSPECTION
MODE
1) Check that the
Rear Axle
A: REMOVAL
1) Lift up the vehicle, and then remove the rear wheels.
2) Remove the axle nut.
CAUTION:
Do not loosen the axle nut while the rear axle is loaded. Doing so may damage
the hub bearing.
Lift the crimped section of axle nut.
Remove the axle nut using a socket wrench while depressing th
© 2010-2026 Copyright www.suoutback.com
