Subaru Outback manuals

Subaru Outback (BR): Fluids

*1: Use one of the indicated types of fluid.

 

*1: Use one of the indicated types of fluid.

*2: The indicated fluid quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors.

*3: For more details about maintenance and service, refer to the indicated section.

READ NEXT:

 Engine coolant - Subaru super coolant

  The specified coolant quantity serves as a general reference and may vary slightly based on temperature and other variables. For comprehensive information regarding maintenance and servici

 Electrical system

 

 Tires specification in the table

  *1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts by yourself, have the tighteni

SEE MORE:

 To set cruise control

1. Press the “CRUISE” main switch button. The cruise control indicator light on the combination meter will illuminate. 2. Depress the accelerator pedal until the vehicle reaches the desired speed. 3. Press the “RES/SET” switch to the “SET” side and release it. Then release the

 Low beam light bulbs

1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7. 2. Remove the bulb cover, by turning it counterclockwise. 3. Disconnect the electrical connector. 4. Remove the retainer spring. 5. Replace the bulb, then set the retainer spring securely.

© 2010-2024 Copyright www.suoutback.com