Subaru Outback (BR): Recommended brake fluid
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Brake fluid / Recommended brake fluid
CAUTION
Never use different brands of brake fluid together. Also, avoid mixing DOT 3 and DOT 4 brake fluids even if they are the same brand.
READ NEXT:
Checking the fluid level in MT models
WARNING
Never let clutch fluid contact your eyes because clutch fluid can be harmful to your eyes. If clutch fluid gets in your eyes, immediately flush them thoroughly with clean water. For safety,
Recommended clutch fluid
CAUTION
Never use different brands of clutch fluid together. Also, avoid mixing DOT 3
and DOT 4 brake fluids even if they are the same brand.
SEE MORE:
How to use Subaru Select Monitor, data, modes
A: OPERATION
1. HOW TO USE SUBARU SELECT MONITOR
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
If communication is not possible between the electronic parking brake control module and the Subaru Select Monitor, check the
Crankshaft Position Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the bolt which secures crankshaft position
sensor to oil pump.
3) Remove the crankshaft position sensor, and disconnect
the connector from the crankshaft position
sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tig
© 2010-2026 Copyright www.suoutback.com
