Subaru Outback (BR): Recommended clutch fluid
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Clutch fluid (MT models) / Recommended clutch fluid
CAUTION
Never use different brands of clutch fluid together. Also, avoid mixing DOT 3 and DOT 4 brake fluids even if they are the same brand.
READ NEXT:
Brake pedal
Check the brake pedal free play and reserve distance according to the maintenance
schedule in the “Warranty and Maintenance Booklet”.
Checking the brake pedal free play
1) 0.08 – 0.18 in (2 – 5 mm)
Stop the engine and firmly depress the brake pedal several times. Lightly pull
the brake pedal up with one finger to check the free play with a force of less than
SEE MORE:
Pulling off the fender lining
It is necessary to pull off the fender lining when replacing some bulbs.
1. Start the engine and turn the steering wheel fully in the opposite direction
of the bulb to be replaced.
2. Stop the engine.
3. Remove the clip from the fender lining. Refer to “Type B clips” F11-5.
4. Pull off
Lower Inner Trim
A: REMOVAL
1) Release the claws, and then remove the side sill cover-front INN.
CAUTION:
Do not pull with excessive force. Doing so may damage the claws of the side sill
cover INN.
NOTE:
To release the claws of the side sill cover INN, the following steps are
recommended.
1. Take out the weather
© 2010-2025 Copyright www.suoutback.com
