Subaru Outback: Recommended tire inflation pressure
Subaru Outback (BR) 2010-2015 Owners Manual / Consumer information and Reporting safety defects / Tire information / Recommended tire inflation pressure
- Recommended cold tire inflation pressure
- Vehicle placard
- Adverse safety consequences of under-inflation
- Measuring and adjusting air pressure to achieve proper inflation
READ NEXT:
Recommended cold tire inflation pressure
For the recommended cold tire inflation pressure for your vehicle’s tires, refer
to “Tires” F12-8.
Vehicle placard
The vehicle placard is affixed to the driver’s side B-pillar.
Example:
The vehicle placard shows original tire size, recommended cold tire inflation
pressure on each tire at maximum loaded v
Adverse safety consequences of under-inflation
Driving at high speeds with excessively low tire pressures can cause the tires
to flex severely and to rapidly become hot. A sharp increase in temperature could
cause tread separation, and failure
SEE MORE:
GVWR and GAWR (Gross Vehicle Weight Rating and Gross Axle Weight Rating)
Certification label
The certification label attached to the driver’s side door shows GVWR (Gross
Vehicle Weight Rating) and GAWR (Gross Axle Weight Rating).
The GVW (Gross Vehicle Weight) must never exceed the GVWR. GVW is the combined
total of weight of the vehicle, fuel, driver, all pass
Front Sub Sensor
A: REMOVAL
1) Disconnect the ground cable from battery and wait for at least 60 seconds
before starting work.
2) Remove the front bumper face assembly.
Remove the clips, turn over the front mud guard, and disconnect the fog
light connector. (Model with
fog light)
Remove the clips at the u
© 2010-2021 Copyright www.suoutback.com