Subaru Outback (BR): Tire labeling
Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed on the sidewall of a tire by tire manufacturers. These marking can provide you with useful information on the tire.
READ NEXT:
Tire size
Your vehicle comes equipped with P-Metric tire size. It is important to understand
the sizing system in selecting the proper tire for your vehicles. Here is a brief
review of the tire sizing syste
Tire Identification Number (TIN)
Tire Identification Number (TIN) is marked on the intended outboard sidewall.
The TIN is composed of four groups. Here is a brief review of the TIN with a breakdown
of its individual elements.
Other markings
The following makings are also placed on the sidewall.
Maximum permissible inflation pressure
The maximum cold inflation pressure to which this tire may be inflated. For example,
“350 kPa (51 PS
SEE MORE:
Cylinder Block
A: REMOVAL
NOTE:
Before conducting this procedure, drain the engine
oil completely.
1) Remove the engine from the vehicle. <Ref. to
ME(H4SO)-31, REMOVAL, Engine Assembly.>
2) Remove the intake manifold. <Ref. to
FU(H4SO)-17, REMOVAL, Intake Manifold.>
3) Remove the crank pulley. <R
ATF Cooler Pipe and Hose
A: REMOVAL
1) Remove the collector cover.
NOTE:
Follow the steps below when removing the collector
cover.
Pull up the two points at the rear (A).
Pull up the two points at the front (B) while
moving them forward.
2) Remove the battery.
3) Lift up the vehicle.
4) Remove the under cover. <R
© 2010-2026 Copyright www.suoutback.com
