Subaru Outback (BR): Valet mode
When you choose the valet mode, the alarm system does not operate. In valet mode, the remote transmitter is used only for locking and unlocking the doors and rear gate (Outback) and panic activation.
To enter the valet mode, change the setting of your vehicle’s alarm system for deactivation mode. Refer to “Activating and deactivating the alarm system” F2- 16. The security indicator light will continue to flash once every 3 seconds indicating that the system is in the valet mode.
To exit valet mode, change the setting of your vehicle’s alarm system for activation mode. Refer to “Activating and deactivating the alarm system” F2-16.
READ NEXT:
Passive arming
When passive arming mode has been programmed by the dealer, arming of the system
is automatically accomplished without using the remote transmitter. Note that in
this mode, DOORS MUST BE MANUALLY
To enter the passive mode
If you wish to program the passive arming mode, have it done by your SUBARU dealer.
Arming the system
CAUTION
In passive mode, the system will automatically activate the alarm but WILL NOT
automatically lock the doors. In order to lock the doors you must either lock them
as indicated in step 4 be
SEE MORE:
Headlights
To turn on the headlights, turn the knob on the end of the turn signal lever.
first position
Instrument panel illumination, tail lights, front side marker lights and license
plate lights are on.
second position
Headlights, instrument panel illumination, front side marker lights, tail light
Electronic parking brake system warning
The brake system warning light flashes when the electronic parking
brake system is malfunctioning. If the warning light flashes, promptly park in a
safe location as soon as possible and contact your SUBARU dealer.
The brake system warning light remains illuminated when the parking
brake canno
© 2010-2026 Copyright www.suoutback.com
