Subaru Outback (BR): Removing and reinstalling clips
Removing clips
There are several types of clips used for your vehicle
Type A clips
1. Turn the clips counterclockwise using a flat-head screwdriver until the center portion of the clip is raised.
2. Remove the clips with a flat-head screwdriver using leverage.
Type B clips
1. Pull out the center portion of the clip using a flat-head screwdriver as shown in the illustration.
2. Pull the protruded center portion to remove the entire body of the clip.
Type C clips
1. Turn the clip counterclockwise using a Phillips screwdriver until the center portion of the clip is raised.
2. Remove the entire clip by pulling it up.
Reinstalling clips
Type A clips
Type B clips
Type C clips
Insert the clip without the center portion first and then push the center portion of the clip into the hole.
READ NEXT:
Removing air intake duct
Use a screwdriver to undo the clips on the air intake duct, then remove the air
intake duct. Refer to “Type A clips” F11-5.
Pulling off the fender lining
It is necessary to pull off the fender lining when replacing some bulbs.
1. Start the engine and turn the steering wheel fully in the opposite direction
of the bulb to be replaced.
2. Stop the eng
Engine hood
To open the hood:
1. If the wiper blades are lifted off the windshield, return them to their original
positions.
2. Pull the hood release knob under the instrument panel.
3. Release the secon
SEE MORE:
Oil Pressure System
A: WIRING DIAGRAM
B: INSPECTION
Engine Oil
A: INSPECTION
CAUTION:
If the engine oil is spilt over exhaust pipe or the
under cover, wipe it off with cloth to avoid emitting
smoke or causing a fire.
1) Park the vehicle on a level surface.
2) Remove the oil level gauge and wipe away the
oil.
3) Rei
Vehicle load limit – how to determine
The load capacity of your vehicle is determined by weight, not by available cargo
space. The load limit of your vehicle is shown on the vehicle placard attached to
the driver’s side B-pillar. Locate the statement “The combined weight of occupants
and cargo should never exceed XXX kg or XXX
