Subaru Outback (BR): Automatic transmission fluid
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Automatic transmission fluid
READ NEXT:
Checking the fluid level in Automatic transmission
The automatic transmission fluid expands largely as its temperature rises; the fluid level differs according to fluid temperature. Therefore, there are two different scales for checking the level of
Check the fluid level monthly.
1. Drive the vehicle several miles to raise the temperature of the transmission
fluid up to normal operating temperature; 158 to 1768F (70 to 808C) is normal.
2. Park the vehicle on a level surface
Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the automatic
transmission, check to see that the fluid level is between the lower level and upper
level on the “COLD” range. If
SEE MORE:
Coolant temperature low indicator light/Coolant temperature high warning light
CAUTION
● After turning the ignition switch to the “ON” position, if this indicator light/warning
light behaves under any of the following conditions, the electrical system may be
malfunctioning. Contact your SUBARU dealer immediately for an inspection.
– It remains blinking in RED
Driving on snowy and icy roads
WARNING
Do not use the cruise control on slippery roads such as snowy or icy roads. This
may cause loss of vehicle control.
CAUTION
Avoid prolonged continuous driving in snowstorms. Snow will enter the engine’s
intake system and may hinder the airflow, which could result in engine shutdown
© 2010-2026 Copyright www.suoutback.com
