Subaru Outback (BR): Checking the brake pedal free play
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Brake pedal / Checking the brake pedal free play
1) 0.08 – 0.18 in (2 – 5 mm)
Stop the engine and firmly depress the brake pedal several times. Lightly pull the brake pedal up with one finger to check the free play with a force of less than 2 lbf (10 N, 1 kgf).
If the free play is not within proper specification, contact your SUBARU dealer.
READ NEXT:
Checking the brake pedal reserve distance
1) More than 2.56 in (65 mm)
Depress the pedal with a force of approximately 66 lbf (294 N, 30 kgf) and measure
the distance between the upper surface of the pedal pad and the floor.
When the me
Clutch pedal (MT models)
Check the clutch pedal free play and reserve distance according to the maintenance
schedule in the “Warranty and Maintenance Booklet”.
Checking the clutch function
Check the clutch engagement and disengagement.
1. With the engine idling, check that there are no abnormal noises when the clutch
pedal is depressed, and that shifting into 1st or reverse feels smo
SEE MORE:
If the light is blinking
If the light is blinking while driving, an engine misfire condition has been
detected which may damage the emission control system.
To prevent serious damage to the emission control system, you should conform
to the following instructions.
● Reduce vehicle speed.
● Avoid hard acce
Menu list of the Hands-free system
Turn the “TUNE/TRACK/CH” dial to select a menu, and then press the dial to enter
the selected menu.
NOTE
For details about the operation, follow the voice guidance.
*: If a cell phone is not registered, the menu described in the chart is not
indicated.
*: If a PIN code is not regis
© 2010-2026 Copyright www.suoutback.com
