Subaru Outback (BR): Breaking-in of new brake pads and linings
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Replacement of brake pad and lining / Breaking-in of new brake pads and linings
When replacing the brake pad or lining, use only genuine SUBARU parts. After replacement, the new parts must be broken in as follows:
READ NEXT:
Brake pad and lining
While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake
pedal lightly. Repeat this five or more times.
Parking brake lining
The break-in maintenance for the parking brake linings should be performed at
a SUBARU dealer.
SEE MORE:
Side mirrors
After hitching a trailer to your vehicle, check that the standard side mirrors provide a good rearward field of view without significant blind spots. If significant blind spots occur with the vehicle’s standard side mirrors, use towing mirrors that conform with Federal, state/prov
Inhibitor Switch
A: INSPECTION
When the driving condition or starter motor operation is improper, first
check the shift linkage for improper operation.
If the shift linkage is functioning properly, check the inhibitor switch.
1) Remove the air intake boot assembly. <Ref. to IN(H4SO)-8, REMOVAL, Air Intake
Boo
© 2010-2026 Copyright www.suoutback.com
