Subaru Outback manuals

Subaru Outback (BR): How to insert a CD(s) (type B)

1. Briefly press the “LOAD” button. If the magazine in the player has an idle


1. Briefly press the “LOAD” button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink.

If no indicator blinks, it means that there is no idle position in the magazine.

2. When the “LOAD” indicator illuminates, insert the disc. Once you have inserted the disc, the “LOAD” indicator will turn off and the “LOADING” indicator will illuminate. The disc will then be automatically drawn in, the player will begin to play back the first track of the disc, the “LOADING” indicator will turn off and the “READING” indicator will illuminate.

● To insert more discs in succession, repeat steps 1 and 2. The magazine will be loaded with discs in the ascending order of position number.

● If you do not insert any disc in 15 seconds after you have pressed the “LOAD” button, the player will return to the original mode that was selected before the “LOAD” button was pressed.

● The disc indicator steadily lights up if a disc is already inserted in the corresponding position of the magazine.

● While the player is in the loading mode, if you press “FM”, “AM” or “SAT” button, the player will enter the standby mode. Press the “CD/AUX” button to start playback.

READ NEXT:

 Inserting a disc in a desired position

1. Briefly press the “LOAD” button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. T

 Loading all the magazine (full disc loading mode)

1. If you continue to press the “LOAD” button for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator flashe

 How to play back a CD

NOTE For type A audio, if a disc that the player cannot read has been loaded, the player will display the message “CHECK DISC”.

SEE MORE:

 Speed Control Systems

General Description A: SPECIFICATION B: COMPONENT Accelerator pedal ASSY Clip Accelerator plate Accelerator stopper Tightening torque: N*m (kgf-m, ft-lb) T: 18 (1.8, 13.3) C: CAUTION Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing

 Seat fabric

Remove loose dirt, dust or debris with a vacuum cleaner. If the dirt is caked on the fabric or hard to remove with a vacuum cleaner, use a soft brush then vacuum it. Wipe the fabric surface with a tightly wrung cloth and dry the seat fabric thoroughly. If the fabric is still dirty, wipe using

© 2010-2024 Copyright www.suoutback.com