Subaru Outback (BR): Power window operation by passengers
READ NEXT:
Each passenger window can be controlled by the power window switch located on
the door.
To open: Press the switch down and hold it until the window reaches the desired
position.
To close: Pull the switch up and hold it until the window reaches the desired
position. When the lock s
If the vehicle’s battery is disconnected due to situations such as battery or
fuse replacement, the following functions are deactivated.
● One-touch auto up/down function
● Anti-entr
SEE MORE:
CAUTION
Do not use the bars as roof rails when the bars are stowed.
1. Pull out the crossbars from the roof rail holders by pulling up the covers.
2. Slide the bars in the direction shown in the illustration.
3. Install the bars into the holders.
4. Make sure that the latches are fitted s
A: REMOVAL
NOTE:
The spot map light is a single unit with the overhead console.
1) Disconnect the ground cable from battery.
2) Remove the overhead console assembly.
Push and open the rear end of the overhead console lid, and remove the
screws.
Remove the clips and pull out the overhead consol
© 2010-2026 Copyright www.suoutback.com
