Subaru Outback (BR): Tires specification in the table
Subaru Outback (BR) 2010-2015 Owners Manual / Specifications / Tires specification in the table
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts by yourself, have the tightening torque checked at the nearest automotive service facility as soon as possible.
*2: For the wheel nut tightening procedure, refer to “Changing a flat tire” F9-6.
READ NEXT:
Wheel alignment
Item
Legacy
Outback
2.5 L non-turbo models
Except 2.5 L non-turbo models
SEE MORE:
Engine Mounting
A: REMOVAL
1) Change the front hood damper mounting position
from (A) to (B), and completely open the front
hood.
Tightening torque:
20 N*m (2.0 kgf-m, 14.8 ft-lb)
2) Disconnect the ground cable from battery.
3) Remove the radiator main fan motor assembly
and radiator sub fan motor assembly. <R
Changing the coolant
WARNING
Never attempt to remove the radiator cap until the engine has been shut off and
has cooled down completely. Since the coolant is under pressure, you may suffer
serious burns from a spray of boiling hot coolant when the cap is removed.
Always add genuine SUBARU cooling system conditione
© 2010-2025 Copyright www.suoutback.com
