Subaru Outback (BR): Consumer information and Reporting safety defects
Subaru Outback (BR) 2010-2015 Owners Manual / Consumer information and Reporting safety defects
- For U.S.A
- Tire information
- Tire labeling
- Recommended tire inflation pressure
- Glossary of tire terminology
- Tire care – maintenance and safety practices
- Vehicle load limit – how to determine
- Determining compatibility of tire and vehicle load capacities
- Adverse safety consequences of overloading on handling and stopping and on tires
- Steps for Determining Correct Load Limit
- Uniform tire quality grading standards
- Reporting safety defects (USA)
READ NEXT:
For U.S.A
The following information has been compiled according to Code of Federal Regulations
“Title 49, Part 575”.
Tire labeling
Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed
on the sidewall of a tire by tire manufacturers. These marking can provide you with
useful information on the tire.
SEE MORE:
Rear Differential Front Oil
Seal
A: INSPECTION
Make sure that there is no leakage from front oil
seal portion. If there is any leakage, replace the oil
seal and inspect the propeller shaft.
B: REPLACEMENT
1) Shift the select lever or gear shift lever to neutral.
2) Release the parking brake.
3) Disconnect the ground cable from ba
Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the automatic
transmission, check to see that the fluid level is between the lower level and upper
level on the “COLD” range. If it is below that range, add fluid up to the upper
level. Be careful not to overfill.
CAUTION
Be
© 2010-2026 Copyright www.suoutback.com
