Subaru Outback (BR): Cruise control activation indicator light
Subaru Outback (BR) 2010-2015 Owners Manual / Starting and operating / Cruise control / Cruise control activation indicator light
The indicator light for cruise control activation illuminates upon turning the ignition switch to the “ON” position and remains lit for around 3 seconds.
This light becomes illuminated when the vehicle speed has been successfully set using the cruise control function.
READ NEXT:
New vehicle break-in driving – the first 1,000 miles (1,600 km)
The performance and long life of your vehicle are dependent on how you handle
and care for your vehicle while it is new. Follow these instructions during the
first 1,000 miles (1,600 km):
●
Fuel economy hints
The following suggestions will help to save your fuel.
● Select the proper gear position for the speed and road conditions.
● Avoid sudden acceleration or deceleration. Always accelerate
SEE MORE:
Measuring and adjusting air pressure to achieve proper inflation
Check and, if necessary, adjust the pressure of each tire (including the spare)
at least once a month and before any long journey. Check the tire pressures when
the tires are cold. Use a pressure gauge to adjust the tire pressures to the specific
values. Driving even a short distance warms up
Front Sub Sensor
A: REMOVAL
1) Disconnect the ground cable from battery and wait for at least 60 seconds
before starting work.
2) Remove the front bumper face assembly.
Remove the clips, turn over the front mud guard, and disconnect the fog
light connector. (Model with
fog light)
Remove the clips at the u
© 2010-2026 Copyright www.suoutback.com
