Subaru Outback (BR): Cleaning the interior
Use a soft, damp cloth to clean the climate control panel, audio equipment, instrument
panel, center console, combination meter panel, and switches. (Do not use organic
solvents.)
READ NEXT:
Remove loose dirt, dust or debris with a vacuum cleaner. If the dirt is caked
on the fabric or hard to remove with a vacuum cleaner, use a soft brush then vacuum
it. Wipe the fabric surface with a
The leather used by SUBARU is a high quality natural product which will retain
its distinctive appearance and feel for many years with proper care.
Allowing dust or road dirt to build up on the sur
The synthetic leather material used on the SUBARU may be cleaned using mild soap
or detergent and water, after first vacuuming or brushing away loose dirt. Allow
the soap to soak in for a few minu
SEE MORE:
A: REMOVAL
NOTE:
When replacing a single part, perform the work with
the engine assembly installed to body.
1) Remove the crank pulley. <Ref. to ME(H4SO)-
45, REMOVAL, Crank Pulley.>
2) Remove the stopper rod.
3) Remove the timing belt cover LH (A).
4) Remove the front timing belt cover (B)
A: REMOVAL
CAUTION:
Refer to "CAUTION" of "General Description" before handling the airbag module.
<Ref. to AB-9,
CAUTION, General Description.>
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and wait for at least 60 seconds
before starting work.
3) Remove
© 2010-2026 Copyright www.suoutback.com
