Subaru Outback (BR): Climate control panel, audio panel, instrument panel, console panel, switches, combination meter, and other plastic surface
Subaru Outback (BR) 2010-2015 Owners Manual / Appearance care / Cleaning the interior / Climate control panel, audio panel, instrument panel, console panel, switches,
combination meter, and other plastic surface
Use a soft, damp cloth to clean the climate control panel, audio equipment, instrument panel, center console, combination meter panel, and switches.
NOTE
Do not use organic solvents such as paint thinners or gasoline, or strong cleaning agents that contain those solvents.
READ NEXT:
Navigation monitor (if equipped)
To clean the navigation monitor, wipe it with a silicone cloth or with a soft
cloth. If the navigation monitor is extremely dirty, clean it with a soft cloth
moistened with neutral detergent then
Maintenance schedule
The scheduled maintenance items required to be serviced at regular intervals
are shown in the “Warranty and Maintenance Booklet”.
For details about your maintenance schedule, read the separate
SEE MORE:
Front Reduction Driven Gear
A: REMOVAL
NOTE:
For removal of front reduction driven gear, refer to the "Front Reduction Drive
Gear". <Ref. to CVT-297, REMOVAL,
Front Reduction Drive Gear.>
B: INSTALLATION
NOTE:
For installation of front reduction driven gear, refer to the "Front Reduction
Drive Gear". <Ref. to CVT-29
Front Strut
A: REMOVAL
1) Lift up the vehicle, and then remove the front wheels.
2) Remove the front strut.
Place an alignment mark on the camber adjusting bolt and strut.
Remove the brake hose bracket.
Remove the ABS wheel speed sensor harness.
Remove the two bolts securing the front axle housing t
© 2010-2025 Copyright www.suoutback.com
