Subaru Outback manuals

Subaru Outback (BR): Meters and gauges

NOTE

Liquid crystal displays are used in some of the meters and gauges in the combination meter. You will find their indications hard to see if you wear polarized glasses.

READ NEXT:

 Combination meter illumination

When the ignition switch is turned to the “ON” position, the various parts of the combination meter are illuminated in the following sequence. 1. Warning lights, indicator lights, meter needles

 Canceling the function for meter/gauge needle movement upon turning on the ignition switch

It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position. 1. Turn the ignition swi

 Speedometer

The speedometer shows the vehicle speed.

SEE MORE:

 Manual Transmission Mounting System

A: REMOVAL 1. CROSSMEMBER AND CUSHION RUBBER 1) Disconnect the ground cable from battery. 2) Lift up the vehicle. 3) Remove the front under cover. <Ref. to EI-35, REMOVAL, Front Under Cover.> 4) Remove the front and center exhaust pipes. (non-turbo model) <Ref. to EX(H4SO)-5, REMOVAL,

 Tire Pressure Monitoring System (Diagnostics)

Basic Diagnostic Procedure A: PROCEDURE CAUTION: Before removal or installation, be sure to remove any foreign matter (dust, moisture, oil, etc.) from the TPMS & keyless entry control module connector. NOTE: To check harness for open or short circuits, shake the suspected trouble spot or conne

© 2010-2025 Copyright www.suoutback.com