Subaru Outback: Seats
READ NEXT:
A: COMPONENT
1. FRONT SEAT
Manual seat LH
Backrest heater ASSY
Backrest pad
Backrest cover
Backrest frame ASSY
Backrest back cover
Headrest bushing
Headrest ASSY
Flat mat hook
S hook
Si
A: REMOVAL
CAUTION:
The airbag system is fitted with a backup power supply. After disconnecting the
battery ground cable,
the airbag may operate if you do not wait for 60 seconds before starting the
A: REMOVAL
1. SEDAN MODEL
1) Remove the rear seat cushion.
Pull up the seat cushion and release the hook.
CAUTION:
If the hook is removed from vehicle body, replace the hook with the new part to
a
SEE MORE:
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the V-belts. <Ref. to ME(H4SO)-43, VBELT,
REMOVAL, V-belt.> <Ref. to
ME(H4DOTC)-42, V-BELT, REMOVAL, V-belt.>
<Ref. to ME(H6DO)-51, REMOVAL, V-belt.>
3) Disconnect the connector and terminal from
generator.
4) Re
A: PROCEDURE
CAUTION:
Remove foreign matter (dust, water, oil etc.) from the VDCCM&H/U connector
during removal and installation.
NOTE:
To check the harness for open or short circuits, shake problem spot or
connector.
Refer to "Check List for Interview". <Ref. to VDC(diag)-4, Check List
© 2010-2022 Copyright www.suoutback.com