Subaru Outback (BR): Tire chains
CAUTION
Tire chains cannot be used on any tires for your Legacy and Outback because of lack of clearance between the tires and vehicle body.
READ NEXT:
Rocking the vehicle
If you must rock the vehicle to free it from snow, sand, or mud, depress the
accelerator pedal slightly and move the shift lever/select lever back and forth
between “1”/“D” and “R” rep
Loading your vehicle
WARNING
Never allow passengers to ride on a folded rear seatback, in the trunk or in
the cargo area. Doing so may result in serious injury.
WARNING
● Never stack luggage or other cargo hi
Vehicle capacity weight
The load capacity of your vehicle is determined by weight, not by available cargo
space. The maximum load you can carry in your vehicle is shown on the vehicle placard
attached to the driver
SEE MORE:
Crankshaft Position Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the bolt which secures crankshaft position
sensor to oil pump.
3) Remove the crankshaft position sensor, and disconnect
the connector from the crankshaft position
sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tig
Inspection Locations after a Collision
A: REPLACEMENT
Replace the following parts if the airbag has been activated.
1. FRONT COLLISION
1) Driver's airbag module.
2) Passenger's airbag module.
3) Driver's seat belt (pretensioner).
4) Passenger's seat belt (pretensioner).
5) Airbag control module.
6) Front sub sensor (right and left).
© 2010-2026 Copyright www.suoutback.com
