Subaru Outback (BR): Recommended cold tire inflation pressure
For the recommended cold tire inflation pressure for your vehicle’s tires, refer
to “Tires” F12-8.
READ NEXT:
The vehicle placard is affixed to the driver’s side B-pillar.
Example:
The vehicle placard shows original tire size, recommended cold tire inflation
pressure on each tire at maximum loaded v
Check and, if necessary, adjust the pressure of each tire (including the spare)
at least once a month and before any long journey. Check the tire pressures when
the tires are cold. Use a pressure
SEE MORE:
A: REMOVAL
1) Remove the front seats. <Ref. to SE-10, REMOVAL, Front Seat.>
2) Remove the instrument panel face assembly. <Ref. to EI-76, REMOVAL,
Instrument Panel Assembly.>
3) Remove the rear heater duct.
Pull off the floor carpet to disengage the rear heater duct slide lock.
Rel
A: REMOVAL
1) Lift up the vehicle, and then remove the front wheels.
2) Remove the front strut.
Place an alignment mark on the camber adjusting bolt and strut.
Remove the brake hose bracket.
Remove the ABS wheel speed sensor harness.
Remove the two bolts securing the front axle housing t
© 2010-2026 Copyright www.suoutback.com
