Subaru Outback manuals

Subaru Outback (BR): Examples of the types of accidents in which the SRS side airbag is unlikely to deploy.

1) The vehicle is involved in an oblique side-on impact.


1) The vehicle is involved in an oblique side-on impact.

2) The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment.

3) The vehicle strikes a telephone pole or similar object.

4) The vehicle is involved in a side-on impact from a motorcycle.

5) The vehicle rolls onto its side or the roof.

There are many types of collisions which might not necessarily require SRS side airbag deployment. In the event of accidents like those illustrated, the SRS side airbag may not deploy depending on the level of accident forces involved.

READ NEXT:

 Examples of the types of accidents in which the SRS curtain airbag is unlikely to deploy.

Outback models 1) The vehicle is involved in an oblique side-on impact. 2) The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment. 3) The vehic

 Examples of the types of accidents in which the SRS side airbag and SRS curtain airbag will basically not deploy.

1) The vehicle is involved in frontal collision with another vehicle (moving or stationary). 2) The vehicle is struck from behind. 3) The vehicle pitches end over end. In the event of accidents

 SRS airbag system monitors

A diagnostic system continually monitors the readiness of the SRS airbag system (including front seatbelt pretensioners) while the vehicle is being driven. The SRS airbag system warning light wi

SEE MORE:

 Hazard warning flasher

The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position. To turn on the hazard warning flasher, press the hazard warning button on the instrument panel.

 Front Arm

A: REMOVAL 1) Lift up the vehicle, and then remove the front wheels. 2) Remove the front arm. Remove the nut and disconnect the front stabilizer link. Remove the bolt, and then remove the ball joint for the front arm. Remove the bolts, then remove the front arm. B: INSTALLATION 1) Before i

© 2010-2026 Copyright www.suoutback.com