Subaru Outback manuals

Subaru Outback: Security indicator light

This indicator light shows the status of the alarm system. It also indicates


This indicator light shows the status of the alarm system. It also indicates operation of the immobilizer system.

READ NEXT:

 Alarm system

It blinks to show the driver the operational status of the alarm system. For detailed information, refer to “Alarm system” F2- 15.

 Immobilizer system

This light blinks approximately 60 seconds after the ignition switch is turned from “ON” position to the “Acc” or “LOCK” position or immediately after the key is pulled out. Refer to

 Select lever/gear position indicator

1) Upshift/downshift indicator (AT and CVT models) This indicator shows the position of the shift lever (MT models) or select lever (AT and CVT models).

SEE MORE:

 Oil Pressure Switch

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the generator. <Ref. to SC(H4SO)-18, REMOVAL, Generator.> 3) Disconnect the terminal from oil pressure switch. 4) Remove the oil pressure switch. B: INSTALLATION 1) Apply liquid gasket to the oil pressure switch threads. Li

 Towing with all wheels on the ground

WARNING ● Never turn the ignition switch to the “LOCK” position while the vehicle is being towed because the steering wheel and the direction of the wheels will be locked. ● Remember that the brake booster and power steering do not function when the engine is not running. Bec

© 2010-2023 Copyright www.suoutback.com